AdPurify reference

Ad Verification and IVT Ad Protection Glossary

A practical reference to the rules, signals and measurements used to assess advertising traffic, protect ad placements and understand traffic quality.

A

Ad execution
The point at which a wrapped advertising tag is permitted to run. AdPurify rules can be used to decide whether execution should continue or be prevented for a particular visit.
Ad slot
The page location or placement where an advertising tag runs. AdPurify can apply a separate set of checks to each wrapped slot, so one placement does not have to use the same policy as another.
Ad tag wrapper
The AdPurify code placed around an existing advertising tag. It lets the page apply configured checks before the wrapped tag is allowed to execute, without requiring the publisher to rebuild the ad creative.
AdPurify IP abuse list
A maintained collection of IP addresses previously associated with confirmed abuse or invalid traffic. The matching rule can use this list as one signal when deciding whether a visit should be monitored or blocked.
AdPurify rule
A configurable check used to evaluate a visit or an ad placement against a traffic-quality, targeting, or measurement condition. A rule can be configured for monitoring or, where supported, blocking.
AdPurify rule set
The collection of rules assigned to a wrapped ad slot. Rule sets let publishers and advertisers apply different checks to different placements instead of relying on one site-wide policy.
Advertiser monitoring
Using AdPurify to observe traffic quality signals around an advertising tag without automatically preventing the tag from running. This is useful when an advertiser wants evidence before deciding whether a source or segment should be excluded.
Allowlist
A list of IP addresses, IP ranges, domains, or other explicitly trusted values that a rule permits. In AdPurify, allowlists can help preserve access for known offices, partners, or approved referrers.
ASN
An Autonomous System Number identifies a network operated by an organization such as a hosting provider or internet service provider. AdPurify can use ASN-based rules to identify traffic coming from selected networks, while taking care not to treat every user on a large network as invalid.
Automated browser
A browser controlled by software rather than by a person, often through tools such as Selenium, Puppeteer, or Playwright. Automation can be legitimate, but it can also generate artificial visits or ad interactions that deserve investigation.

B

Below-the-fold placement
An ad placement positioned outside the initially visible area of a page. AdPurify viewability measurement can help determine whether visitors ever scroll far enough for that placement to enter the viewport.
Blocking mode
A rule mode in which a matching condition prevents the wrapped ad tag from loading. Blocking is best reserved for sufficiently reliable signals or policies, because an overly broad rule can also exclude legitimate visitors.
Bounce-and-fire pattern
A visit pattern in which an ad request or click occurs even though the visitor leaves almost immediately or shows little evidence of a genuine page visit. It can be a useful warning signal, but short visits alone do not prove fraud.
Browser interaction signal
Evidence of activity such as mouse movement, touch, scrolling, or keyboard input. AdPurify can monitor the absence of interaction before an ad loads, but should interpret it carefully because passive reading and accessibility tools may involve little visible input.
Browser language mismatch
A discrepancy between the browser's preferred language and the country inferred from the visitor's IP address. AdPurify can flag this as a possible location-spoofing signal, not as proof that the visitor is fraudulent.
Browser storage availability
Whether browser storage mechanisms such as cookies or local storage can be used. AdPurify can detect when storage is unavailable, but this may reflect privacy settings or browser restrictions rather than malicious activity.

C

CIDR range
A compact notation for an IP network range, such as 203.0.113.0/24. AdPurify IP range rules can use CIDR values to allow or block a group of addresses instead of entering each address individually.
Clean traffic
Traffic that meets the quality and policy requirements chosen for a particular advertising placement or campaign. In AdPurify, the definition is configurable: a publisher and an advertiser may apply different thresholds and rules.
Click-farm pattern
A pattern of repeated or coordinated ad clicks that may be generated by paid workers, scripts, or organized groups. Repeated clicks from one IP can be a signal, although shared networks can also produce legitimate repeat activity.
Click-quality rule
An AdPurify check focused on whether ad clicks appear genuine and consistent with the configured policy. Examples include repeated clicks from the same IP or unusual timing and volume patterns.
Country allowlist
A list of countries from which visits are permitted under a geographic rule. It can help publishers limit inventory to selected markets or advertisers keep campaign traffic within intended locations.
Country blocklist
A list of countries from which visits are excluded by a geographic rule. It should reflect a real campaign or inventory requirement rather than assume that visitors from a particular country are inherently invalid.

D

Datacenter network
A network used to host servers, cloud infrastructure, or other data-center services. Traffic from these networks can include automation, but also legitimate monitoring and business services, so network origin is a signal rather than a verdict.
Device and behavior signal
A browser or session characteristic used to assess whether a visit looks consistent with ordinary user activity. AdPurify rules can combine signals such as screen dimensions, interaction, automation indicators, and storage availability.
Domain referrer allowlist
A set of approved referring domains from which traffic is accepted. AdPurify can use it to restrict placements to known sites or partners, while accounting for legitimate visits where browsers do not send a referrer.

G

Geo verification
Checking whether a visit's inferred location matches the geographic requirements configured for a campaign or placement. AdPurify supports country-level checks and more specific region or city targeting where the required location data is available.
Geographic mismatch
A disagreement between location-related signals, such as an IP-derived country and the browser's timezone or language. AdPurify can monitor these inconsistencies to identify visits that may be masking or misrepresenting their location.
GIVT
General Invalid Traffic is a category of invalid traffic that includes known crawlers, spiders, and other recognized non-human activity. AdPurify's GIVT rule checks visits against known classifications and bot lists.

H

Headless browser
A browser that runs without a normal visible user interface, often for testing or automation. Headless operation is not automatically malicious, but it can be relevant when assessing automated ad traffic.
Hidden ad slot
An ad placement that loads while being concealed or made effectively invisible through dimensions, opacity, positioning, or layering. AdPurify can monitor or block configured cases because an unseen placement does not provide normal viewable exposure.
High-velocity IP
An IP address generating an unusually high number of requests or clicks within a short period. AdPurify can apply a velocity threshold to identify possible automation or abuse, while accounting for shared networks such as offices and mobile carriers.
Human interaction check
A check for user input signals before an ad tag runs. It can help identify automated sessions, but the absence of interaction should normally be treated as a risk signal rather than conclusive evidence.

I

Iframe restriction
A rule controlling whether an ad tag may run when the page is embedded inside an iframe. AdPurify can use permitted framing domains to reduce unauthorized embedding and certain clickjacking risks.
Impression integrity
The extent to which an ad delivery event corresponds to a legitimate placement and a real opportunity for exposure. AdPurify contributes signals such as hidden-slot detection, page behavior, and viewability measurement to help assess that quality.
In-geo verification
A check that compares a visit's inferred location with the geographic target of a campaign. AdPurify can flag or block visits outside the configured target, depending on the selected rule mode.
Invalid traffic (IVT)
Traffic that does not represent genuine ad activity or does not meet applicable traffic-quality standards. AdPurify helps evaluate selected indicators of invalid traffic; no single browser or network signal should be treated as definitive proof.
IP abuse history
Information indicating that an IP address has previously been associated with abusive or invalid activity. AdPurify can use this history as an input to reputation and matching rules.
IP geolocation
The estimated geographic location associated with an IP address. AdPurify can compare this estimate with campaign targeting or other browser signals, but IP geolocation is not exact and may be affected by VPNs, mobile networks, and routing.
IP range rule
A rule that evaluates a visitor's IP address against manually configured addresses or CIDR ranges. It can be used to block unwanted traffic or preserve trusted sources through explicit allow entries.
IP reputation score
A risk score derived from an IP address's known history and associated signals. AdPurify can use a configurable threshold to separate lower-risk traffic from visits that warrant monitoring or blocking.
IP velocity
The rate at which requests or clicks arrive from a single IP address during a defined time window. A high rate can indicate automation or abuse, but shared public IP addresses may aggregate activity from many real people.

L

Language restriction
A targeting rule that allows or blocks visits according to the browser's preferred language. AdPurify can apply it when language is part of the campaign's audience requirements; language alone is not reliable proof of a visitor's location.
Local-time targeting
A rule that applies only during selected hours or days, often using the visitor's inferred local time. AdPurify can use time-of-day and day-of-week conditions to align delivery with campaign schedules or investigate unusual traffic periods.

M

Missing referrer
A visit for which the browser does not provide a referring page. AdPurify can flag this condition as one possible risk signal, but privacy controls, direct navigation, and browser policies can also remove referrer information.
Monitor mode
A rule mode in which AdPurify records a match while allowing the wrapped ad tag to continue running. It is useful for measuring how often a condition occurs before deciding whether blocking would be appropriate.
MRC viewability standard
The commonly used display-ad viewability benchmark of at least 50% of an ad's pixels being in view for at least one continuous second. AdPurify's viewability rule measures against this threshold to help assess whether a placement had a reasonable opportunity to be seen.

N

Network reputation
An assessment of the trust or risk associated with the network an IP address belongs to. AdPurify can use network-level indicators such as ASN and known abuse associations as part of a broader traffic-quality decision.

O

Operating system restriction
A targeting rule that permits or excludes visits based on the reported operating system. It can support app campaigns or compatibility requirements, but reported device information can be incomplete or altered.

P

Page-pattern rule
A rule that targets URLs, page paths, or site sections using configured patterns. AdPurify can use it to control where an ad tag runs, such as excluding account, checkout, or other restricted pages.
Placement-level policy
The set of traffic, targeting, and measurement conditions applied to one advertising placement. AdPurify's per-slot configuration lets different placements use policies suited to their role and audience.
Publisher blocking
Using AdPurify to prevent a wrapped ad tag from executing when a configured rule matches. Publishers can use this to protect inventory, enforce placement requirements, or reduce delivery to traffic that fails their chosen checks.

R

Referrer verification
Checking the referring domain or the absence of referrer information against a configured policy. AdPurify can use allowlists and missing-referrer signals to help identify traffic arriving from unexpected sources.
Refresh loop
Repeated reloads of the same page or placement within a short period. AdPurify can detect configured refresh patterns that may inflate ad delivery events or create suspicious click opportunities.
Region targeting
A geographic rule that evaluates visits against a selected region, state, or similar sub-country area. AdPurify can use region-level checks when a campaign or publisher requirement is more specific than country targeting.
Risk threshold
The configured point at which a score or signal changes how a visit is handled. In AdPurify, thresholds can separate monitoring from blocking, helping users avoid treating every suspicious indicator as an automatic rejection.

S

Same-IP multiple clicks
A rule that detects repeated ad clicks associated with the same IP address within a defined period. It can help identify click abuse, but shared household, workplace, or carrier networks can also produce repeat clicks.
Screen-size anomaly
A browser report of screen or viewport dimensions that are implausible or invalid, such as zero-sized dimensions. AdPurify can use this as an automation signal, while recognizing that unusual devices and embedded browsers exist.
Stacked ad slots
Multiple ad placements layered over one another so that one or more may be obscured. AdPurify can detect configured overlap or concealment patterns that undermine the integrity of ad exposure.

T

Time-in-view
The amount of time an ad remains within the visible browser viewport. AdPurify can measure this duration to distinguish brief exposure from placements that stay visible for longer.
Timezone-to-IP mismatch
A difference between the browser's reported timezone and the timezone expected from the IP's estimated location. AdPurify can flag large discrepancies as a possible proxy or location-spoofing signal, not as proof on its own.
Tor exit node
A server through which traffic leaves the Tor network and reaches the public internet. AdPurify can identify known Tor exit-node addresses when a publisher or advertiser chooses to monitor or restrict this type of traffic.
Traffic-source rule
A rule that evaluates where a visit appears to originate, using signals such as referrer domains and embedding context. AdPurify can use these rules to enforce approved-source policies and investigate unexpected traffic.

V

Viewability measurement
The measurement of whether and for how long an ad appears within the visible browser area. AdPurify includes viewability-oriented checks such as the MRC threshold, time in view, and below-the-fold placement detection.
VPN detection
Identifying visits whose IP addresses are associated with known commercial VPN or proxy services. AdPurify can monitor this signal when location authenticity matters, while recognizing that VPNs are also used for legitimate privacy and security reasons.

W

WebDriver signal
A browser property commonly associated with automated control frameworks. AdPurify can inspect automation-related browser signals as part of automated-browser detection, but such indicators can be changed or absent in some automated environments.
Weekday and daypart rule
A schedule condition that limits when an ad tag is allowed to run, such as selected weekdays or local-time windows. AdPurify can use it to align delivery with campaign schedules or investigate unusual off-hour activity.

Z

Zero-interaction session
A session with no detected mouse, touch, scroll, or keyboard activity during a configured observation period. AdPurify can flag this pattern, but it should not be equated automatically with a bot because visitors may read without interacting.